Removing the gas piston from the bolt on a Romy AK47? - removing piston from chair seat
A recently captured AK and strives to polish the bolt and tried to remove the gas piston, thus not only failed to obtain a form. Ive done a little research and seems to be a needle into the flask to dissolve the screw, and I can not find one. Ive been trying to screw and used to move at all. Furthermore, it should get an extra pin for pistons and not go to war, I thought they were very reliable and I do not know if it gets in the way or not needed. Thank you.
Thursday, February 18, 2010
Removing Piston From Chair Seat Removing The Gas Piston From The Bolt On A Romy AK47?
Subscribe to:
Post Comments (Atom)
There is a pin that holds the piston is a solid nail is made of beaten with a hammer until the squash, then the ends are filed, or the washing machine. To remove the stylus, it is necessary to drill an end, and then negotiate the pin side of the drill requires a drill or a grinder to make it right.
ReplyDeleteIf you only use the screw are polished, I would stop the piston location that really is not worth it to remove and then reinstall just for them. You Do not Mess up Just do polish or grind the end, when the piston is very real.
You do not really need anything .... Romy AK as they are all like a brick reliable.
ReplyDeleteIt is a pen, there is the problem that after driving through, take the piece that is almost invisible to the pen. It is considered a good indicator of a fold .....
The gas piston is attached to the slide. You need to drill out.
ReplyDelete